zx5t953g datasheet number: ds33425 rev. 5 - 2 1 of 7 www.diodes.com march 2015 ? diodes incorporated zx5t953g a product line of diodes incorporated 100v pnp medium power transistor in sot223 features ? bv ceo > -100v ? i c = -5a high continuous collector current ? i cm = -10a peak pulse current ? low saturation voltage v ce(sat) < -90mv @ -1a ? r sat = 60m for a low equivalent on-resistance ? h fe specified up to -10a for a high gain hold-up ? lead-free finish; rohs compliant (notes 1 & 2) ? halogen and antimony free. ?green? device (note 3) ? qualified to aec-q101 standards for high reliabilit y ? ppap capable (note 4) mechanical data ? case: sot223 ? case material: molded plastic. ?green? molding com pound; ul flammability rating 94v-0 ? moisture sensitivity: level 1 per j-std-020 ? terminals: finish - matte tin plated leads, solder able per mil-std-202, method 208 ? weight: 0.112 grams (approximate) applications ? motor driving ? line switching ? high side switches ? subscriber line interface cards (slic) ordering information (notes 4 & 5) product compliance marking reel size (inches) tape width (mm) quantity per reel zx5t953gta aec-q101 x5t953 7 12 1,000 zx5t953gqta automotive x5t953 7 12 1,000 notes: 1. eu directive 2002/95/ec (rohs) & 2011/65/ eu (rohs 2) compliant. all applicable rohs exemptio ns applied. 2. see http://www.diodes.com/quality/lead_free.htm l for more information about diodes incorporated?s definitions of halogen- and antimony-free, "green" and lead-free. 3. halogen- and antimony-free "green? products are defined as those which contain <900ppm bromine, <9 00ppm chlorine (<1500ppm total br + cl) and <1000ppm antimony compounds. 4. automotive products are aec-q101 qualified and are ppap capable. automotive, aec-q101 and standar d products are electrically and thermally the same, except where specified. 5. for packaging details, go to our website at http :// www.diodes.com/products/packages.html. marking information sot223 sot223 top view device symbol top view pin-out c e b green y w w x5t 953 x5t 953 = product type marking code yww = date code marking y or y = last digit of year (ex: 5= 2015) ww or ww = week code (01~53)
zx5t953g datasheet number: ds33425 rev. 5 - 2 2 of 7 www.diodes.com march 2015 ? diodes incorporated zx5t953g a product line of diodes incorporated maximum ratings (@ t a = +25c, unless otherwise specified.) characteristic symbol value unit collector-base voltage v cbo -140 v collector-emitter voltage v ceo -100 v emitter-base voltage v ebo -7 v continuous collector current i c -5 a peak pulse current i cm -10 a thermal characteristics (@ t a = +25c, unless otherwise specified.) characteristic symbol value unit power dissipation linear derating factor (note 6) p d 3.0 24 w mw /c (note 7) 1.6 12.8 thermal resistance, junction to ambient (note 6) r ja 42 c/w (note 7) r ja 78 thermal resistance junction to lead (note 8) r jl 10.4 operating and storage temperature range t j, t stg -55 to +150 c esd ratings (note 9) characteristic symbol value unit jedec class electrostatic discharge - human body model esd hbm 4,000 v 3a electrostatic discharge - machine model esd mm 400 v c notes: 6. for a device mounted with the collector l ead on 52mm x 52mm 2oz copper that is on a single-s ided 1.6mm fr4 pcb; device is measured under still air conditions whilst operating in a ste ady-state. 7. same as note 5, except the device is mounted on 25mm x 25mm 1oz copper. 8. thermal resistance from junction to solder-point (at the end of the collector lead). 9. refer to jedec specification jesd22-a114 and jes d22-a115.
zx5t953g datasheet number: ds33425 rev. 5 - 2 3 of 7 www.diodes.com march 2015 ? diodes incorporated zx5t953g a product line of diodes incorporated thermal characteristics and derating information 100m 1 10 100 10m 100m 1 10 single pulse. t amb =25c 52mmx52mm fr4 2oz cu v ce(sat) limit 100s 1ms 10ms 100ms 1s dc safe operating area -i c collector current (a) -v ce collector-emitter voltage (v) 0 20 40 60 80 100 120 140 160 0.0 0.5 1.0 1.5 2.0 2.5 3.0 25mmx25mm fr4 1oz cu 52mmx52mm fr4 2oz cu derating curve temperature (c) max power dissipation (w) 100 1m 10m 100m 1 10 100 1k 0 10 20 30 40 52mmx52mm fr4 2oz cu transient thermal impedance d=0.5 d=0.2 d=0.1 single pulse d=0.05 thermal resistance (c/w) pulse width (s) 100 1m 10m 100m 1 10 100 1k 1 10 100 single pulse. t amb =25c 52mmx52mm fr4 2oz cu pulse power dissipation pulse width (s) max power dissipation (w)
zx5t953g datasheet number: ds33425 rev. 5 - 2 4 of 7 www.diodes.com march 2015 ? diodes incorporated zx5t953g a product line of diodes incorporated electrical characteristics (@ t a = +25c, unless otherwise specified.) characteristic symbol min typ max unit test condition collector-base breakdown voltage bv cbo -140 -160 - v i c = -100a collector-emitter breakdown voltage bv ce r -140 -160 - v i c = -1a, rb 1k collector-emitter breakdown voltage (note 10) bv ceo -100 -115 - v i c = -1ma emitter-base breakdown voltage bv ebo -7 -8.1 - v i e = -100a collector-base cut-off current i cbo - <1 - -20 -0.5 na a v cb = -100v v cb = -100v, t a = +100c collector-emitter cut-off current i cer r 1k - <1 - -20 -0.5 na a v cb = -100v v cb = -100v, t a = +100c emitter cut-off current i ebo - <1 -10 na v eb = -6v static forward current transfer ratio (note 10) h fe 100 250 - - i c = -10ma, v ce = -1v 100 200 300 i c = -1a, v ce = -1v 25 50 - i c = -3a, v ce = -1v 15 30 - i c = -4a, v ce = -1v - 5 - i c = -10a, v ce = -1v collector-emitter saturation voltage (note 10) v ce(sat) - -20 -30 mv i c = -100ma, i b = -10ma - -70 -90 i c = -1a, i b = -100ma - -120 -150 i c = -2a, i b = -200ma - -240 -340 i c = -4a, i b = -400ma base-emitter saturation voltage (note 10) v be(sat) - -985 -1100 mv i c = -4a, i b = -400mv base-emitter turn-on voltage (note 10) v be(on) - -920 -1050 mv i c = -4a, v ce = -2v output capacitance (note 10) c obo - 42 - pf v cb = -10v. f = 1mhz transition frequency f t - 125 - mhz v ce = -10v, i c = -100ma f = 50mhz switching time t on - 42 - ns v cc = -10v, i c = -1a i b1 = i b2 = -100ma t off - 540 - note: 10. measured under pulsed conditions. pulse w idth 300s. duty cycle 2%.
zx5t953g datasheet number: ds33425 rev. 5 - 2 5 of 7 www.diodes.com march 2015 ? diodes incorporated zx5t953g a product line of diodes incorporated typical electrical characteristics (@ t a = +25c, unless otherwise specified.) 1m 10m 100m 1 10 10m 100m 1 1m 10m 100m 1 10 0.0 0.1 0.2 0.3 0.4 0.5 0.6 1m 10m 100m 1 10 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1m 10m 100m 1 10 0.4 0.6 0.8 1.0 1.2 1m 10m 100m 1 10 0.4 0.6 0.8 1.0 1.2 1.4 0 50 100 150 200 250 v ce(sat) v i c tamb=25c i c /i b =50 i c /i b =20 i c /i b =10 - v ce(sat) (v) - i c collector current (a) v be(sat) v i c i c /i b =10 100c 25c -55c - v ce(sat) (v) - i c collector current (a) h fe v i c v ce =2v -55c 25c 100c normalised gain - i c collector current (a) 25c v ce(sat) v i c i c /i b =10 100c -55c - v be(sat) (v) - i c collector current (a) v be(on) v i c v ce =2v 100c 25c -55c - v be(on) (v) - i c collector current (a) typical gain (h fe )
zx5t953g datasheet number: ds33425 rev. 5 - 2 6 of 7 www.diodes.com march 2015 ? diodes incorporated zx5t953g a product line of diodes incorporated package outline dimensions please see ap02002 at http://www.diodes.com/datashe ets/ap02002.pdf for the latest version. suggested pad layout please see ap02001 at http://www.diodes.com/datashe ets/ap02001.pdf for the latest version. note: for high voltage applications, the appropria te industry sector guidelines should be considered with regards to creepage and clearance distances be tween device terminals and pcb tracking. sot223 dim min max typ a 1.55 1.65 1.60 a1 0.010 0.15 0.05 b 0.60 0.80 0.70 b1 2.90 3.10 3.00 c 0.20 0.30 0.25 d 6.45 6.55 6.50 e 3.45 3.55 3.50 e1 6.90 7.10 7.00 e - - 4.60 e1 - - 2.30 l 0.85 1.05 0.95 q 0.84 0.94 0.89 all dimensions in mm dimensions value (in mm) c 2.30 c1 6.40 x 1.20 x1 3.30 y 1.60 y1 1.60 y2 8.00 a1 a 7 7 d b e e1 b1 c e1 l 0 - 1 0 q e 0.25 seating plane gauge plane x1 y1 y x c c1 y2
zx5t953g datasheet number: ds33425 rev. 5 - 2 7 of 7 www.diodes.com march 2015 ? diodes incorporated zx5t953g a product line of diodes incorporated important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranti es of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisd iction). diodes incorporated and its subsidiaries reserve th e right to make modifications, enhancements, improv ements, corrections or other changes without further notice to this document and any pro duct described herein. diodes incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does diodes incorporated convey any license under its patent or trademark rights, nor the rights of others. any cu stomer or user of this document or products describ ed herein in such applications shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability whatsoever in respect of any products pur chased through unauthorized sales channel. should customers purchase or use diodes incorporate d products for any unintended or unauthorized appli cation, customers shall indemnify and hold diodes incorporated and its representatives ha rmless against all claims, damages, expenses, and a ttorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized appl ication. products described herein may be covered by one or more united states, international or foreign patent s pending. product names and markings noted herein may also be covered by one or more uni ted states, international or foreign trademarks. this document is written in english but may be tran slated into multiple languages for reference. only the english version of this document is the final and determinative format released by diodes i ncorporated. life support diodes incorporated products are specifically not a uthorized for use as critical components in life su pport devices or systems without the express written approval of the chief executive officer of diodes incorporated. as used herein: a. life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to per form when properly used in accordance with instruct ions for use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a lif e support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affe ct its safety or effectiveness. customers represent that they have all necessary ex pertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsi ble for all legal, regulatory and safety-related re quirements concerning their products and any use of diodes incorporated products in such safety- critical, life support devices or systems, notwiths tanding any devices- or systems-related information or support that may be provided by diod es incorporated. further, customers must fully ind emnify diodes incorporated and its representatives against any damages arising out of the use of diodes incorporated products in such saf ety-critical, life support devices or systems. copyright ? 2015, diodes incorporated www.diodes.com
|
